3.7 Connecting method
<USB connection>
Note! Please refer to user's manual for operation environment.
Prepare for USB cable
Notes! • The printer cable is not included.
Provide the USB2.0 cable for special user.
• When connecting the cable in [Hi-Speed] mode of USB 2.0, please use
the USB cable with Hi-Speed spec.
• Select the USB cable of less than 5m. It is recommended to use the
USB cable of less than 2m.
Turn the MFP and computer OFF.
Memo Although USB cable can plug-and-play with computer and MFP power on,
after this the setup of printer driver and USB driver may be required. Here
the MFP is turned off to plug-and-play the USB cable.
Connect the computer to the MFP.
(1) Insert the USB cable into the USB interface connector of MFP.
(2) Insert the USB cable into the USB interface connector of computer.
Note! Do not insert the USB cable into the network interface connector.
It may cause trouble.
USB Interface connector
Memo Please refer to user's manual for setup of printer driver.
3. Set up
65 /