Table of Contents
Advertisement
Steps
1. Align and place the camera module into the slot on the display back cover.
2. Connect the camera module cable to the connector on the camera module.
3. Adhere the tape to secure the camera cable to the camera.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
WLAN
card.
5. Install the
4G WWAN card
6. Install the
base
cover.
7. Install the
SIM
card.
8. Follow the procedure in
Display hinges
Removing the display hinges
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
base
cover.
4. Remove the
4G WWAN card
5. Remove the
WLAN
card.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
8. Remove the
display
panel.
About this task
The following images indicate the location of the display hinges and provide a visual representation of the removal procedure.
112
Removing and installing Field Replaceable Units (FRUs)
or
5G WWAN
card, as applicable.
After working inside your
Before working inside your
or
5G WWAN
card, as applicable.
computer.
computer.
Advertisement
Table of Contents
