Display Hinges; Removing The Display Hinges - Dell Latitude 5520 Service Manual
Hide thumbs
Also See for Latitude 5520:
- Owner's manual (111 pages) ,
- Setup and specifications (28 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
Steps
1. Align and place the sensor board on the display back cover.
2. Connect the display cable to the connector on the sensor board and close the latch.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
base
cover.
5. Install the
microSD
card.
6. Install the
SIM
card.
7. Follow the procedure in
Display hinges
Removing the display hinges
Prerequisites
1. Follow the procedure in
2. Enter
service
mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
8. Remove the
display
panel.
About this task
The following images indicate the location of the display hinges and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
87
Advertisement
Table of Contents
