Table of Contents
Advertisement
D-STAR OPERATION
■ About reflectors
D What is a reflector?
A reflector is a special server connected to the Internet and running a version of the
D-Plus software. If the D-Plus software is installed on your Access repeater, it provides
various functions including gateway and reflector linking capabilities (It is known as the
D-STAR reflector system). The D-STAR reflector system enables a number of D-STAR
repeaters anywhere to link to a reflector. This means that when you transmit through a
D-STAR repeater linked to a reflector, your voice can be heard on other repeaters linked
to the reflector, and you can hear other stations that are connected to the reflector.
D Unlinking a reflector
Before trying to link to another reflector, BE SURE to unlink the reflector that is currently
connected to the repeater.
NOTE: If a reflector is already connected, ask on the air whether or not you can change
reflectors and wait for responses. BE SURE to reconnect back to the same reflector
when you finish your conversation.
1.
Push D-pad() to select "TO," and then push [ENT].
2.
Select "Reflector."
3.
Select "Unlink Reflector."
• Returns to the DR screen, and "Unlink Reflector" and "U" are displayed in "TO."
4.
Hold down [PTT] to unlink the reflector.
• The TX/RX indicator lights red.
57
D-STAR reflector system
Reflector
Access
repeater
USA
CAN
UK
AUS
Advertisement
Table of Contents
