Kenwood XD-750 Instruction Manual page 53

A station has been preset but it cannot
be received by pressing the P.GALL key.
id.
phagreeneccescaaessees
eThe frequency of the preset station is not
wnable
e@The preset memory has been cleared be-
cause the power cord has been unplugged
for along period.
hie bs 2)
XD-750/700/550/556 (En)
@Preset Stations with tunable frequencies.
Preset stations again
Demonstration starts suddenly.
Cassette deck
Sound cannot be produced by pressing
the play key or no operation occurs even
when an operation key is pressed.
eThe power plug was unplugged trom the
outlet while the power switch was ON, or
there was a power faiture.
qacesaety
xee 238
Gad
eES 5425400
rweercan
eThis is not malfunction. Press the DISP./
DEMO key to cancel the demontration
77
Lberesseesere
eThe head ts dirty
eThe tape is wourd toe ight Jus ty incyule
winding.
@A nonrecorded tape is played.
Clean the head referring to "Maintenance".
we Tiy aruther tape
Play a recorded tape
i
No operation occurs even when an opera-
tion key is pressed.
eThe cassette holder is not closed com-
pletely
e@The operation key is pressed immediately
after closing the cassette holder.
@The operation key is pressed in fess than 4
seconds after lurning tne power ON
@A tape is not inserted in the unit
e The tape is wound too tight due to irregular
winding
@The tane is filly worind to ane of the reais
Close the holder completely.
Press operations keys in more than a few
seconds after closing the holder.
Press operation keys after waiting for more
than 4 seconds.
elnsert a tape
eTry another tape
@Change the tape transpart direction or ren
verse the tape insertion orientation
~ 20.
The DPSS malfunctions.
eThe tape used is not suitable for DPSS, for
example the spaces between tunes may be
too short
@Refer to "Searching for the desired music
program (DPSS)"
In dubbing, the tape stops at different
moments in decks A and B.
eThis is due to the difference in the tape
length or characteristics of the mechanisms
of two cassette decke
eSmall time difference does not mean a
malfunction.
The cassette holders cannot be opened by
pressing the PUSH OPEN area.
The key is pressed during recording or play-
back
eThe microcomputer is malfunctioning due
to external noise.
Press in stop mode
@Reset the microcomputer
Sound is harsh or high frequencies are not
reproduced.
eThe head is dirty.
eThe tape is stretched or shrunk
@ Clean the head referring to "Maintenance"
eTry another tape
~ | Sound is distorted.
The tape being played was recorded with
distorted sound
Try another tape
Noise is noticeable.
eThe tape head is maanetized.
External noise is induced.
@A tape recorded with Dolby NR ON is played
witlt Bully NA OFF.
@Demaanetize the head referrna to "Main-
tenance"
einstali the system at 4 distance from other
electric appliances and TV.
Set the Dolby NR to on
| Sound vibrates.
dR
@The capstans or pinch rollers are dirty
The tape is wound irregularly.
Clean the head referring to "Maintenance"
eWind the tape again by fast forwarding,
rewinding or playing fram an end ta the
other
Recording cannot be started by pressing
the record key.
L
eThe recording protect tab of the cassette
has been broken.
@Ine cassette holder is not closed com-
pletely
eThe TAPE input is selected
Tho tape is fully wound to one of the reals
Use a cassette with an unbroken recording
protect tab or block the hole.
Close the holder completely
Select the source to be recorded with the
input selector key
Chango tho topo transport direction of deck.
B or reverse the tape insertion orientation
Volume of the recorded track changed.
i recording,
eMIC MIX. contro! knob is moved during
Fully turn the MIC MIX. control knob to the
left.