Kenwood XD-750 Instruction Manual page 17

see tue
ati Her
nee eet :
Betssss ft seeeetrsciat But
eee
eetiraeccees
Muting the sound temporarily (Remote contra! unit only}
Blinks
a oo
—_
' tt ous as
ee =!
Remote control unit ar NN. Ly eviioor
Press again to resume the original volume.
e@The sound muting is also canceled when the volume is controlled.
Bass compensation (N.B.: Natural Bass circuit)
(Remote control unit only)
eS
Remote control unit
Each proees of the koy ewitchee tho cotting.
@ NB wae The low frequencies are compensated
according to the current volume level.
(Effective for low-level listening)
@ NB Z wee The low frequencies are compensated
regardless of the volume level.
@ NB OFF (N.B. deactivated)
atestit ttt
X0-750/700/ 550/550 (En)
Listening through headphones
@insert the headphone plug into the PHONES jack.
y)
eThe suunus fron all speakers ary Gut Uff.
@ Adjust the volume.
Bass and treble compensation
The EX.BASS (Extra Bass) function compensates for the high
and low frequencies and has been set to on before the sys-
tem left the factory.
=<cBass
Each press switches EX.BASS on and off alternately.
When CD has been selected
econ » »
rT Ia ee mae
Lu Loe Lily Li AD:
» BF TT) nevmooe
AUTO POWER SAVE function
When the power is ON and neither recording nor playback is
executed for 30 minutes or more, the power is switched off au-
tomatically by this function. This function can be made active
or not active by the following operation.
Press when the
pawear ic OFF
Each press switches the modes as follows.
Lest a
==
mm
ca
en
c 1. ON..... Auto power save is used.
2. OFF....Auto power save is not used.
@ This function is not available when the AUX input is selected. When
the TUNER input is selected, it is available only when the volume is
set to 0
STANDBY made of ON/STANDBY switch
When the power cord of this system is plugged into an AC out-
let, the display lights up regardless of the ON/OFF setting of the
ON/STANDBV ewitch. Thic indicates that a emall amount of cur
rent is being supplied to the unit to back up the memory con-
tents. mode is referred to as the Standby mode. While the
display is lit, the power of the system can be switched ON/OFF
from the remote control unit.