Kenwood XD-750 Instruction Manual page 46

This unit incorporates a clock function. Be sure to adjust
the correct time before using the timer function
The time is displayed only while the power is off.
Ensure that the power is OFF.
Activate the clock adjustment mode.
AUTO
A
Qo
To increase
the figure
EEE
To sas
o figure
[ ENTER
El Enter the figure of minute.
e To increase
the figure
OEE
O
To decrease
Ue figure
=
xD-750/700/6550/S50 (En)
Example: Adjustment to 8:45
The time display starts to blink
The time of the day is represented in 12-hour AM/PM method.
Press the ENTER key. The hour is entered and the minute display starts
ty blink.
-2 =
@|f you make a mistake, restart from the beginning
eTu aujust Conect tine, pics Ue ENTER key al the same moment as
a time announcement
@ The time display blinks after a power failure or when the power cordhas.
been unplugged from the AC outlet and plugged again. In such a case,
adjust the clock aaain