Kenwood XD-750 Instruction Manual page 14

XD-750/700/550/550 [En]
Loading batteries
@ Remove the cover. @ Insert batteries. © Close the cover.
elnsert two R6 ("AA"-size) batteries fol-
lowing the polarity indications
Operation
Remote seracr
Plug the power cord into the mains power outlet and press
the POWER (on/standby) key of the remote control unit to
turn power ON. After the power has been turned ON, press
the desired key.
To turn power off, press the POWER (on/standby) key
again. The system enters the standby mode in which only
the time display is lit. Model: AC-H3K/H2K
Infrared ray system
eWhen pressing mare than one remote contro! keys successively,
press the keys securely by leaving an interval of 1 second or more
between keys Operating range (approx.}
2, When the remote controllable distance becomes short, replace both of the batteries with new ones
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur
1. The provided batteries are intended for use in operation checkina, and their service life may be short.
jotes
In such a case, change the installation position to avoid malfunction