Charging The Battery Pack - Sony HANDYCAM DCR-TRV380 Operation Manual

Step 2: Chargingthe
battery pack
You can charge the battery by attaching the
"InfoLITHIUM" battery pack (M series)
to your camcorder.
0 Notes
• You cannot use batteries other than the
"InfoLITHIUM" bat*ery pack (M series) (p. 140).
• Do not short-circuit the DC plug of the AC Adaptor
or battery terminals with any metallic objects. This
may cause a [ilal|/inction.
• Use a nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
outlet immediately if any mallhnction occurs.
• Do not install the ippliance in a confined space, such
as a bookcase or build-in cabinet.
Lift up the viewfinder.
Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.
pack
%,
DC IN jack __
To the wall outlet
With the • mark on the DC plug
facing up, connect the AC Adaptor to
the DC IN jack on your camcorder.
• mark
Connect the power cord to the AC
Adaptor.
Connect the power cord to the wall
outlet.
16 Getting
started