Using Zoom; Using The Built-In Light - Sony HANDYCAM DCR-TRV380 Operation Manual

When the CAMERA-TAPE mode is
selected, you can choose zoom to
magnification levels greater than 20 times,
and from that point activate the digital zoom
([DIGITAL ZOOMI, p. (,6).
Occasional use of the zoom is effective, but
nse it sparingly for best results.
cm (approx. ii 80 cm
(approx.
/2 inch)* _: 2 5/8 feet)*
w T
' The minimum dislance required belween your
camcerder and Ihe subject te get a sharp focus in
that position ef Ihe lever.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
To record wider range of view
Mo,_e the power zoom lever towards W.
The subject appears tklrther away (Wide
angle).
To record closer view
Move the power zoom lever towards T.
The subject appears closer (Telephoto).
To usethe zoombuttonson LCDframe
Keep W pressed to record wider range of view.
and keep T pressed to record closer 'dew.
0 Notes
•Yeu cannot change Ihe zoom speed _ith the zoom
buttons on LCD frame.
• To press the zoom buttons on LCD frame, support
the LCD panel with your hand.
You can use the built-in light to suit your
shooting situation. The recommended
distance between the subject and camcorder
is about 1.5 in (5 feet).
Built-in light
LIGHT
m
€'D
c_
=,.
Press LIC-HT repeatedly to select a setting.
The settings are displayed cyclically in the
following order.
No indicator displayed: Always records
without using the built-in light.
,I,
_C_A1JT0 : Automatically turns on and olf
according to Ihe ambient brightness.
,I,
-=_2::aON : Always turns on.
To turn off the built-in light
Press LIGHT repeatedly until no indicator
appears on the screen.
0
Notes
• The built-in vide() light emits ve U bright light,
which is perfectly safe in normal use. However,
avoid directly aiming the light at a subjecCs eyes
from very close range.
_continued
Recording 29