Sony HANDYCAM DCR-TRV380 Operation Manual page 79

Usingthe .....
(STANDARD SET}
menu- REC MODE/MULTI-
SOUND/AUDIO M IX/USB-CAMERA, etc.
Yon can select the items listed below on the
STANDARD SET menu. To select these
items, see "Selecting menu items" (p. 62).
The default settings are marked with t>. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
currently operate. Unavailable items will be
grayed out.
DSP (_) Select to record ill the SP (Standard Play) mode on a cassette.
kP (LT) Select to increase Ihe recording time to 1.5 times the SP mode (Long
Play). The use of Sony cassette is recommended to get the most ()titof
your camcorder.
0 Notes
• IfyourecordintheLPmode amosaic-likenoiscmayappearorsoundmaybcintcrruptcd
when you play back tile tape on other camcorders or VCRs.
• When you mix recordings in the SP mode and in the LP mode on one tape, Ihe playback
picture may be distorted or the time code may not be written properly between the scenes.
I
122
_%
t>12BIT Selecl to record in Ihe 12-bil mode (2 stereo sounds).
16BIT (J_1_[3) Select Io record ill Ihe 16-bil mode (I slereo sound with high qualily).
0 Note
• For DCR-TRV480:
You cannot select AUDIO MODE when you dub tapes recorded in the Digital8 _} system
to another VCR. However, you can select AUDIO MODE when you dub tapes recorded on
other devices in the Hi8 Hi_/standard 8 mm _ system to another VCR, via the _ DV
Interface.
See page 49, 52 fol details.
You can select how to play back audio recorded on a tape in stereo mode. Select
the desired mode when you play back a Digital8 [} system tape which is dubbed
fi'onl a dual sound track tape recorded in the DV system.
=_ continued
Using the Menu
79