Sony HANDYCAM DCR-TRV380 Operation Manual page 98

[Completed.] appears when file recording is
finished.
Rewind the tape on your VCR, then
play back in slow mode.
5 opening numbers lk>reach [IN] and
closing nmnbers lk)r each [OUT] appear.
0Touch [:]_/[:]D to select the average
number value for [CUT-OUT], then
touch [_].
The calculated
slop
position for recording is
set.
_ Touch [END] twice.
value of each [CUT-IN] and the closing
number value of each [CUT-OUT],
then calculate the average number
value for each [CUT-IN] and [CUT-
OUT].
Ill_ i Touch [CUT'IN].
0:0o:0o:0i
- 0
60,+24o
Touch [_/[Z_ to select the average
number value for [CUT-IN], then
touch [_.
The calculated start position for recording
is set.
Touch [CUT-OUT].
0:0o:i
- 0
80, +24o
When you are performing a digital program
edit for the first time to a tape in a VCR, go
through the procedures described in Steps 1
and 2 (p. 94 to p. 97) beforehand.
0
Note
• You cannot dub the title or display indicators.
However, you can dub Ihe title _hich has already
been recorded on a tape.
Prepare a cassette or a "Memory
Stick."
Insert a tape to be played back into the
C_lincorder.
When you are recording on a tape, insert a
cassette for recording into your VCR.
When you are recording on a "Memory
Stick," insert a "Memory Stick" into your
calncorder.
Touch _.
Touch [MENU].
98 Dubbing/Editing