JVC RX-504VBK Service Manual page 5

elaTh coy am Oxeyeny exe) ar-lay am Ore) alal-rentleyarsy
* in case the JVC's monnor
TV has the multi-input
function, connect to the
"VIDEO 1" terminal
VIDEO IN
(EXT IN*)
mc far
' TAPE
Open the speaker terminal Clamp the wire by
by pressing the lever and resetting the lever.
insert the stripped end ot
the cord
@ MONITOR OUT terminal
© SPEAKERS 1, 2 terminals
@ SURROUND SPEAKERS terminals
RX-504VBK/RX-SOAVLBK
RX-505VTN/RX-505VLTN
iFront speakers)
Speakers 2
(Front speakers)
Speakers 4
(Rear speakers)
Surround speakers
Notes:
@ Connect speakers with the correct polarity: (+) to (+) and (—)
to{—}. Reversed polarity wil! Gegrade the stereo effect. Be care
ful to prevent adjacent speaker wires from touching each other.
@ Use sneakers with [ne correct impedance. The correct imped ance
1S indicated on the rear panel of the receiver.
@ When using surround speakers, be sure to connect both the night
and left speakers, connecting only one speaker will not generate
sound
(No.2022 0) 1-5