Auto Memory - JVC RX-504VBK Service Manual

RX-504VBK/RX-504VLBK
RX-505VTN/RX-505VLTN
# AUTO MEMORY
The auto-memory feature scans frequencies upward and presets sta-
tions as they are tuned, in ascending channel number order.
1. Using the TUNING keys, select the frequency from which you want
auto-memory to start (the lower-limit frequency).
2. Press the AUTO MEMORY key to light its indicator.
AUTO sam AUTO
et Pe oi
" Bal'. deh ~~ ch
Enter the starting channel number with the numeric keys while
the indicator is on (about 5 seconds)
_— nS
FM CI OTe \
ie ae as ee jo
@ If the indicator turns off before you enter the channel number,
press the AUTO MEMORY key again.
3. The auto-memory feature starts scanning frequencies upward.
The TUNED indicator will light when a station is tuned, with the
channel number blinking (for about 5 seconds)
AUTO
Fil) Wte A — cogs /
_/ of. Ll ich
4. The presetting is complete when the MEMORY indicator is lit
[MEMORY] [TUNED] [STEREO rts
FM EE ae
ah hcg leh
This continues until the upper-limit frequency ts reached or all 40
channels are filled
Note:
If you do nat want to preset a station, resume scanning by pressing
the AUTO MEMORY key while the channel number is blinking. To
halt the auto-memory feature, press any TUNER key other than the
AUTO MEMORY key.
1-10 (No. 20220)
@ Recalling preset channels
1. Press numeric keys to select a preset chanel.
fi 2
'
@ To indicate numbers 1 through 10, simply press the appropriate
keys.
To indicate numbers over 10, press the appropriate combination
of keys.
Examples;
To indicate 17, press '+ 10", then ''7"'.
To indicate 20, press '+10', then ''10''.
To indicate 26, press ''+ 10"' twice, then ''6"
To indicate 40, press ''+10"' three times, then ''10''.