Table of Contents
Advertisement
Operation with the Remote Control Unit
Aim the signals at the REMOTE SENSOR on the
receiver.
@
Aim the remote control unti at a video equipment to use (such as TV, VCR}.
rorpx-sosvex-suv
AR
RM-SR505U REMOTE CONTROL
17
RX-504VBK/RX-504VLBK
RX-505VTN/RX-505VLTN
@
The remote control unit provided contro! the receiver and JVC's audio
visual gear from a remote
place via the Compu
Link Remote
Control
System
@
Direct the transmitter window of the remote contro! unit at target equip-
ment within a distance of 7 meters.
Take care to avoid obstacles between
the transmitter and the target. Press keys slowly and positively, making
sure the desired functions result.
@
The key markings on the transmitter may not match those on the equip-
ment. Check the markings.
The remote contrl unit cannot control equipment functions they do not
support. Older equipment
may not be receptive to their input.
®@ Check for connection of the COMPU LINK-1/SYNCHRO terminals on the
remote
equipment
by a remote
cable.
@
The operation of each key on the remote control unit is clearly displayed
on the receiver.
For specific
procedures,
refer
to the
instructions
for the
particular
equipment.
@
Switch on the power to all the equipment required before starting opera-
tion. The POWER
key on the remote control unit can switch on the pow-
er to the AUDIO receiver, TV and VCR.
= Name
of Parts and Their Functions
@ POWER
AUDIO:
Press to change the power for the receiver ON or STANDBY.
TV:
Press to turn on or off the power to JVC's TV receiver
VCR:
Press to turn on or off the power to JVC's VCR.
@ SLEEP
Use this control when you want to set the SLEEP TIMER.
@ SOURCE SELECT
Press to change the source selected for input to the receiver. Different
functions are assigned to the Selectable Function keys depending on the
source.
@ Selectable Function keys
These keys function in the mode selected with SOURCE SELECT keys or
Function Mode Select keys
© Function Mode Select
Press to select the equipment you wish to operate
Different functions are assigned to the Selectable Function keys depend-
ing on the equipment.
Pressing these buttons does not change the source selected for input to
the receiver
(©) CSRP
ON/OFF:
= Turns GSRP ON or OFF
DISPLAY:
Use to display the CSRP setting.
@) VOLUME
(-, +)
Press to adjust the output sound level.
MUTE
Press to turn the output sound ON or OFF temporarily.
(No.20220) 1-1 9
Advertisement
Table of Contents
