Table of Contents
Advertisement
RX-504VBK/RX-504VLBK
RX-505VTN/RX-505VLTN
a
®@ Recording
1. Press the SOURCE
key for the desired source.
2. Operate the corresponding source equipment
<If you select PHONO >
PHONO
CP ELIE ERT EY
be
PR BaP EM ed
Turntable and tape deck can be operated.
Notes:
The surround sound is recorded as a normal stereo sound even if
it is recorded with the SURROUND
key is ON
= Three-Head Tape Decks
\f you have a three-head
tape deck, you can use it to monitor the
sound being recorded. Connect the tape deck to the TAPE 2 termi-
nals and proceed as follows:
1. Start recording the source onto the TAPE 2 deck
When the TAPE 2 MONITOR
indicator ts off, you hear the sound
of the source playing through the speakers.
2. Press the TAPE 2 key.
TAPE. 2
TAPE 2 MONITOR
Now you hear the sound of the recording immediately as !t is made
on the tape
© By pressing the TAPE 2 key on and off, you can compare the sound
quality of the source with the quality of the tape recording being
made.
Note:
Set the recording level from the tape deck. It can not be set with
the VOLUME
control of this machine.
13
= Dubbing Tapes
Connect one tape deck to the TAPE 1 terminals, the other tape deck
to the TAPE 2 terminals.
<To record from TAPE
1 to TAPE 2>
1. Press the TAPE 1 key.
TAPE!
2. Play back the TAPE
1 deck and record with the TAPE
2 deck
<To record from TAPE 2 to TAPE
1>
1. Press the TAPE 2 key and a SOURCE key other than TAPE 1.
TAPE 2 MONITOR
TAPE?
co
fr
TI
an
fe
st}
2. Play back the TAPE 2 deck and record with the TAPE
1 deck.
(No.20220) 1-5
Advertisement
Table of Contents
