Table of Contents
Advertisement
RX-504VBK/RX-504VLBK
RX-505VTN/RX-505VLTN
Running
the
CSRP
(Compu Link Source Related Preset System)Feature
CSRP is the state-of-the-art electronic feature that presets volume,
balance, and other control settings. This feature lets you invoke preset
control settings by simply pressing
a SOURCE keys without repeat-
ing many settings each time sources are changed
The following controls can be preset on each SOURCE key (except
TAPE: 23%
# VOLUME
eSURROUND
ON/OFF
*BALANCE
#SURROUND
MODE
*LOUDNESS
ON/OFF
*SURROUND
DELAY TIME
®SEA ON/OFF
SURROUND
REAR LEVEL
°S.E.A.
preset pattern
When the CSRP key is turned ON or when the power is switched
on with the CSRP key ON, the display will show the data settings
on the currently selected SOURCE key in sequence with the indica-
tor blinking rapidity. The blinking indicator changes to a continuously
lit state when the display is complete. Subsequently, a similar dis-
play occurs
each time an additional source
is selected.
Note:
Sources can be preset regardless of whether the CSRP key is ON
or OFF, but when a source is to be preset with the CSRP key OFF,
do not turn it ON until the presetting is complete. If the CSRP key
were turned ON before the presetting is complete, the current data
settings would be recalled to override the presetting in progress.
To confirm the settings presetted in the current source
Press the CSRP DISPLAY
button on the remote control unit
This operation does not turn on or off CSRP.
=
| SRP
josey
|
&
ed)
15
Presetting Procedure
®@ Before proceding,
set the preset state.
1. Press the MEMORY
key to blink its indicator.
MEMORY
SEA
[CSRP]
|
ee
ea
Li
|
FI
PRESET
[
ti
2. Press the SOURCE key for the source to be preset (VCR, VIDEO,
PHONO, CD, FM, AM, or TAPE 1) while the indicator is blinking
(about 5 seconds).
cp
[-
ae
|
ae
zl
—~
I
When the presetting is complete, the display will show preset data
in the following order with the indicator blinking rapidly:
VOLUME,
BALANCE,
LOUDNESS
ON/OFF
> SEA (ON/OFF,
preset pattern) > SURROUND (ON/OFF, MODE, DELAY TIME,
REAR LEVEL)
Note:
Press the MEMORY
key again if the indicator stops blinking before
you press
a SOURCE
key.
Even with the SEA key ON, the SEA PRESET indicator will blink wher
the MEMORY key is pressed if an S.E.A. preset pattern has not beer
previously selected. In this case, select an S.E.A. preset pattern anc
retry this operation.
@ Repeat this operation for each additional source to be preset.
(No.20220) 1-17
Advertisement
Table of Contents
