JVC RX-D302BC Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Stereo Receiver
  5. RX-D302BC
  6. Instructions manual

JVC RX-D302BC Instructions Manual

Audio / video control receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AUDIO / VIDEO CONTROL RECEIVER
RX-D301S / RX-D302B
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1321-001A
[J]

Advertisement

Table of Contents
loading

Related Manuals for JVC RX-D302BC

Summary of Contents for JVC RX-D302BC

  • Page 1 AUDIO / VIDEO CONTROL RECEIVER RX-D301S / RX-D302B For Customer Use: INSTRUCTIONS Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
  • Page 2 Warnings, Cautions, and Others Mises en garde, précautions et indications diverses CAUTION CAUTION Changes or modifications not approved by JVC could void the RISK OF ELECTRIC SHOCK user’s authority to operate the equipment. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, For U.S.A...

  • Page 3: Table Of Contents

    Introducing the DSP modes ..........31 Using the Surround/DSP modes ......... 32 Activating the Surround/DSP modes ........33 AV COMPU LINK remote control system ..34 Operating other JVC products ......36 Operating other manufacturers’ products ..38 Troubleshooting ..........41 Specifications ............42...

  • Page 4: Parts Identification

    SLEEP button (16) g TEST button (24) ANALOG/DIGITAL DECODE MODE * These buttons can be used for operating a JVC DVD recorder MIDNIGHT RETURN or DVD player with the mode selector set to “DVR” or “DVD” (see page 37).
  • Page 5 See pages in parentheses for details. Front panel SOURCE MASTER SELECTOR VOLUME A U D I O / V I D E O C O N T R O L R E C E I V E R / MULTI JOG DVD MULTI DVR / DVD STANDBY/ON...

  • Page 6: Getting Started

    Putting batteries in the remote control Getting started Before using the remote control, put two supplied batteries first. Press and slide the battery cover on the back Before Installation of the remote control. General precautions Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). •...

  • Page 7: Connecting The Fm And Am Antennas

    Connecting the FM and AM antennas Do not connect the AC power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If FM reception is poor, connect an outdoor FM antenna (not supplied). Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

  • Page 8: Connecting The Speakers

    Connecting the speakers Do not connect the AC power plug to the wall outlet until all connections are completed. Speaker Layout Diagram Center Right surround SUBWOOFER speaker (C) back speaker (SBR) CAUTION:SPEAKER IMPEDANCE 6 -16 *Left surround back speaker (SBL) RIGHT LEFT RIGHT...

  • Page 9: Connecting Video Components

    Connecting video components Do not connect the AC power plug to the wall outlet until all connections are completed. This receiver is equipped with the following video terminals— Turn off all components before making connections. composite video, S-video, and component video terminals. •...
  • Page 10 7 Connecting a DVD recorder or DVD player with its analog discrete output jacks (DVD MULTI IN): This connection is the best connection method for enjoying DVD Audio sounds. When a DVD Audio disc is played back, the original high- quality sounds can be reproduced only using this connection.
  • Page 11 Do not connect the AC power plug to the wall outlet until all connections are completed. 7 Connecting a VCR Turn off all components before making connections. • When you connect other components, refer also to their manuals. COMPONENT VIDEO Green Component video cable (not supplied) Blue...
  • Page 12 Do not connect the AC power plug to the wall outlet until all connections are completed. 7 Connecting a DBS tuner Turn off all components before making connections. • When you connect other components, refer also to their manuals. Component video cable (not supplied) Green COMPONENT VIDEO White...
  • Page 13 About video signal conversion NOTES • When shipped from the factory, the DIGITAL IN terminals have This receiver can convert video signals. See the table below about been set for use with the following components: video signal conversion. – 1(DVR/DVD): For DVD recorder or DVD player –...

  • Page 14: Usb Connection

    4. Turn on the receiver, then slide the USB WIRELESS USB Connection switch on the rear to “ID LEARNING,” and select the source as “USB WIRELESS.” This receiver is equipped with a USB terminal on the front panel When you slide the switch, the lamp in the switch starts and a USB WIRELESS ANTENNA terminal on the rear.

  • Page 15: Connecting The Power Cord

    How to install the USB drivers If no sound comes from the speakers, check the following items: The following procedure is described using the English version of Windows XP. If your PC is running on a different version of (For both USB WIRELESS and USB TERMINAL) operation system or language, the screens shown on your PC's - check the USB device is recognized properly.

  • Page 16: Basic Operations

    Select the source to play Basic operations On the front panel: Turn SOURCE SELECTOR until the source name you want appears on the display. The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECTOR, the source changes as follows: ANALOG AUTO SURR...

  • Page 17: Adjust The Volume

    Adjust the volume Selecting the digital decode mode To increase the volume, turn MASTER VOLUME If the following symptoms occur while playing Dolby Digital or DTS software with “DGTL AUTO” selected (see page 14), follow the control clockwise (or press VOLUME + on the procedure below: remote control).

  • Page 18: Changing The Display Brightness

    When “DVD MULTI” is selected as the source, all the signal indicators except “SB,” “S,” and “LFE” light up. JVC’s CC (Compression Compensative) Converter eliminates jitter and ripples, achieving a drastic reduction in digital distortion The speaker indicators light up as follows: by processing the digital music data in 24 bit-quantization and by •...

  • Page 19: Basic Settings

    Turn MULTI JOG to select an appropriate Basic settings number of the connected speakers (speaker channel number). As you turn the jog, the speaker channel number changes as follows. • For the details of speaker channel number, see “ Speakers (channels) number and the size”...

  • Page 20: Basic Setting Items

    Speakers (channels) number and the size Basic setting items You can find how each of the speaker size is defined according to You can adjust the following items. See pages in parentheses for the number of connected speakers (speaker channel “ch” number) details.

  • Page 21: Operating Procedure

    Operating procedure Setting the speakers To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker after all connections are completed. • If you have used Quick Speaker Setup on page 17, this setting is not required.

  • Page 22: Activating The Ex/Es/Pliix Setting-Ex/Es/Pliix

    Setting the speaker distance Activating the EX/ES/PLIIx setting— The distance from your listening point to the speakers is one of EX/ES/PLIIx the important elements to obtain the best possible sound effect from the Surround/DSP modes. By referring to the speaker distance, the receiver automatically Depending on this setting, available Surround modes for digital sets the delay time of the sound through each speaker so that multi-channel software vary—EX/ES/PLIIx (7.1-channel)

  • Page 23: Selecting The Main Or Sub Channel-Dual Mono

    Setting the crossover frequency—CROSSOVER Selecting the main or sub channel Small speakers cannot reproduce the bass sounds efficiently. If —DUAL MONO you use a small speaker in any position, this receiver automatically reallocates the bass sound elements assigned to the small speaker to the large speakers. You can select the playback sound (channel) you want while To use this function properly, set this crossover frequency level playing digital software recorded (or broadcasted) in Dual Mono...

  • Page 24: Setting The Digital Input (Digital In) Terminals -Digital In 1/2/3

    For the VCR (VCR VIDEO IN): Setting the digital input (DIGITAL IN) < > terminals—DIGITAL IN 1/2/3 Select when connecting the VCR to the composite video or S-video input jacks. < > When you use the digital input terminals, register what CMPNT Select when connecting the VCR to the components are connected to which terminals—DIGITAL IN 1/2/3...

  • Page 25: Sound Adjustments

    Operating procedure Sound adjustments On the front panel: Before you start, remember... You can make sound adjustment to your preference after There is a time limit in doing the following steps. If the setting is completing basic setting. canceled before you finish, start from step 1 again. Basic adjustment items Ex.: When adjusting subwoofer output level.

  • Page 26: Adjusting The Speaker Output Levels

    Adjusting the speaker output levels Adjusting the equalization patterns— D EQ 63Hz/250Hz/1kHz/4kHz/16kHz • SUBWFR LVL (subwoofer output level), • FRONT L LVL (left front speaker output level), You can adjust equalization patterns in five frequency bands • FRONT R LVL (right front speaker output level), (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the •...

  • Page 27: Adjusting The Bass Sounds

    Adjusting the bass sounds From the remote control: Reinforcing the bass—BASS BOOST Press EFFECT to select the level you want to adjust. You can boost the bass level—Bass Boost. • Once you have made an adjustment, it is memorized for each source.
  • Page 28 Adjusting the center channel localization for Pro Adjusting the center tone—CENTER TONE Logic IIx Music and Pro Logic II Music—CENTER This setting is available when one of the Surround/DSP modes is WIDTH in use. To activate Surround/DSP mode, see page 33. •...

  • Page 29: Tuner Operations

    Tuning in to stations manually Tuner operations From the remote control ONLY: Press FM or AM to select the band. The last received station of the selected band is tuned in. ANALOG TUNED STEREO AUTO MUTING S.WFR Press repeatedly or hold TUNING 9 or Tuner operations are mainly done from the remote control.

  • Page 30: Selecting The Fm Reception Mode

    Press the numeric buttons (1 – 10, +10) to On the front panel: select a channel number while the channel 2 1,3 number position is flashing. • For channel number 5, press 5. • For channel number 15, press +10, then 5. •...

  • Page 31: Creating Realistic Sound Fields

    Introducing the Surround modes Creating realistic ■ Dolby Digital* sound fields Dolby Digital is a digital signal compression method, developed by Dolby Laboratories, and enables multi-channel encoding and decoding. • When Dolby Digital signal is detected through the digital input, indicator lights up on the display.
  • Page 32 < > “ ” in the speaker setting (see page 19), JVC’s original 3D-PHONIC processing (which has been developed to create DTS Digital Surround the surround effect through the front speakers only) is used. The DTS Digital Surround (DTS) is another discrete 5.1 channel...

  • Page 33: Introducing The Dsp Modes

    ” in the speaker The sound heard in a concert hall, club, etc. consists of direct setting (see page 19), JVC’s original 3D-PHONIC processing sound and indirect sound—early reflections and reflections from (which has been developed to create the surround effect behind.

  • Page 34: Using The Surround/Dsp Modes

    Using the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below. • The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the surround channels.

  • Page 35: Activating The Surround/Dsp Modes

    On the front panel: Activating the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details, see page 32. Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments. Before you start, remember... •...

  • Page 36: Av Compu Link Remote Control System

    This receiver is equipped with the AV COMPU LINK-III, which has through the S-video terminals, connect this receiver to the added a function to operate JVC’s video components through the TV’s video input 1 terminal using S-video cables. component video jacks. To use this remote control system, you...
  • Page 37 Connecting procedure One-touch DVD play Simply by starting playback on the DVD player, you can enjoy the DVD playback without setting other switches manually. If you have already plugged your VCR, DVD • When the DVD player is connected through the analog input player, TV, and this receiver into the AC jacks on this receiver (and analog input is selected), the outlets, unplug their AC power cords first.

  • Page 38: Operating Other Jvc Products

    “A” and “B.” This remote control can operate a VCR whose remote control code is set to “A.” – Some JVC DVD recorders can accept four types of the control signals. This remote control can operate a DVD recorder whose remote control code is set to the initial code.
  • Page 39 Enter recording pause. To start recording, press 3. recorder Some JVC DVD recorders can accept four types of the control signals. You can assign one of four codes to the remote Only for DVD player operations: control supplied with this receiver for operating your DVD recorder.

  • Page 40: Operating Other Manufacturers' Products

    Manufacturers’ codes for TV Operating other Manufacturer Codes manufacturers’ Akai Bell+Howell products Centurion Coronad Daewoo 06, 07, 08 Emerson 09, 10, 11, 12, 13 Fisher GE•Pana 15, 16 By changing the transmittable signals, you can use the GE•RCA supplied remote control to operate other manufacturers’ products.
  • Page 41 ❏ Changing the transmittable signals for operating Manufacturers’ codes for VCR a VCR Manufacturer Codes Press and hold VCR 01, 02, 03, 04 Press VCR. Aiwa Enter the manufacturer’s code using buttons Akai 06, 07, 08 1 – 9, and 0. Bell+Howell See “Manufacturers’...
  • Page 42 ❏ Changing the transmittable signals for operating ❏ Changing the transmittable signals for operating a DVD player a CATV converter or DBS tuner Set the mode selector to “DVD.” Press and hold DBS/CATV Press and hold DVR/DVD Press DBS. Press DVR/DVD. Enter the manufacturer’s code using buttons 1 –...

  • Page 43: Troubleshooting

    Troubleshooting Use this chart to help you solve daily operational problems. If there are any problems you cannot solve, contact your JVC’s service center. PROBLEM POSSIBLE CAUSE SOLUTION The power does not come on. The power cord is not plugged in.

  • Page 44: Specifications

    Video Specifications Video Input Sensitivity/Impedance: Composite video: DVR/DVD, VCR, DBS: 1 V(p-p)/75 Ω S-video: DVR/DVD, VCR, DBS: Y (luminance): 1 V(p-p)/75 Ω C (chrominance, burst): 0.286 V(p-p)/75 Ω Component: DVR/DVD, VCR (DBS): Y (luminance): 1 V(p-p)/75 Ω 0.7 V(p-p)/75 Ω Video Output Level/Impedance: Designs and specifications are subject to change without Composite video: DVR, VCR, MONITOR OUT:...
  • Page 47 © 2005 Victor Company of Japan, Limited 0205RYMMDWJEIN...
  • Page 48 AUDIO / VIDEO CONTROL RECEIVER RECEPTURE DE COMMANDE AUDIO/VIDEO RX-D302B INSTRUCTIONS MANUEL D’INSTRUCTIONS LVT1321-002A...
  • Page 49 Warnings, Cautions, and Others Mises en garde, précautions et indications diverses CAUTION CAUTION Changes or modifications not approved by JVC could void the RISK OF ELECTRIC SHOCK user’s authority to operate the equipment. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, For U.S.A...
  • Page 50 Introducing the DSP modes ..........31 Using the Surround/DSP modes ......... 32 Activating the Surround/DSP modes ........33 AV COMPU LINK remote control system ..34 Operating other JVC products ......36 Operating other manufacturers’ products ..38 Troubleshooting ..........41 Specifications ............42...

  • Page 51: Parts Identification

    SLEEP button (16) g TEST button (24) ANALOG/DIGITAL DECODE MODE * These buttons can be used for operating a JVC DVD recorder MIDNIGHT RETURN or DVD player with the mode selector set to “DVR” or “DVD” (see page 37).
  • Page 52 See pages in parentheses for details. Front panel SOURCE MASTER SELECTOR VOLUME A U D I O / V I D E O C O N T R O L R E C E I V E R / MULTI JOG DVD MULTI DVR / DVD SETTING...

  • Page 53: Getting Started

    Putting batteries in the remote control Getting started Before using the remote control, put two supplied batteries first. Press and slide the battery cover on the back Before Installation of the remote control. General precautions Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). •...

  • Page 54: Connecting The Fm And Am Antennas

    Connecting the FM and AM antennas Do not connect the AC power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If FM reception is poor, connect an outdoor FM antenna (not supplied). Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

  • Page 55: Connecting The Speakers

    Connecting the speakers Do not connect the AC power plug to the wall outlet until all connections are completed. Speaker Layout Diagram Center Right surround SUBWOOFER speaker (C) back speaker (SBR) CAUTION:SPEAKER IMPEDANCE 6 -16 *Left surround back speaker (SBL) RIGHT LEFT LEFT...

  • Page 56: Connecting Video Components

    Connecting video components Do not connect the AC power plug to the wall outlet until all connections are completed. This receiver is equipped with the following video terminals— Turn off all components before making connections. composite video, S-video, and component video terminals. •...
  • Page 57 7 Connecting a DVD recorder or DVD player with its analog discrete output jacks (DVD MULTI IN): This connection is the best connection method for enjoying DVD Audio sounds. When a DVD Audio disc is played back, the original high- quality sounds can be reproduced only using this connection.
  • Page 58 Do not connect the AC power plug to the wall outlet until all connections are completed. 7 Connecting a VCR Turn off all components before making connections. • When you connect other components, refer also to their manuals. COMPONENT VIDEO Green Component video cable (not supplied) Blue...
  • Page 59 Do not connect the AC power plug to the wall outlet until all connections are completed. 7 Connecting a DBS tuner Turn off all components before making connections. • When you connect other components, refer also to their manuals. Component video cable (not supplied) Green COMPONENT VIDEO White...
  • Page 60 About video signal conversion NOTES • When shipped from the factory, the DIGITAL IN terminals have This receiver can convert video signals. See the table below about been set for use with the following components: video signal conversion. – 1(DVR/DVD): For DVD recorder or DVD player Video Input Converted...

  • Page 61: Usb Connection

    4. Turn on the receiver, then slide the USB WIRELESS USB Connection switch on the rear to “ID LEARNING,” and select the source as “USB WIRELESS.” This receiver is equipped with a USB terminal on the front panel When you slide the switch, the lamp in the switch starts and a USB WIRELESS ANTENNA terminal on the rear.

  • Page 62: Connecting The Power Cord

    How to install the USB drivers If no sound comes from the speakers, check the following items: The following procedure is described using the English version of Windows XP. If your PC is running on a different version of (For both USB WIRELESS and USB TERMINAL) operation system or language, the screens shown on your PC's - check the USB device is recognized properly.

  • Page 63: Basic Operations

    Select the source to play Basic operations On the front panel: Turn SOURCE SELECTOR until the source name you want appears on the display. The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECTOR, the source changes as follows: ANALOG AUTO SURR...

  • Page 64: Adjust The Volume

    Adjust the volume Selecting the digital decode mode To increase the volume, turn MASTER VOLUME If the following symptoms occur while playing Dolby Digital or DTS software with “DGTL AUTO” selected (see page 14), follow the control clockwise (or press VOLUME + on the procedure below: remote control).

  • Page 65: Changing The Display Brightness

    When “DVD MULTI” is selected as the source, all the signal indicators except “SB,” “S,” and “LFE” light up. JVC’s CC (Compression Compensative) Converter eliminates jitter and ripples, achieving a drastic reduction in digital distortion The speaker indicators light up as follows: by processing the digital music data in 24 bit-quantization and by •...

  • Page 66: Basic Settings

    Turn MULTI JOG to select an appropriate Basic settings number of the connected speakers (speaker channel number). As you turn the jog, the speaker channel number changes as follows. • For the details of speaker channel number, see “ Speakers (channels) number and the size”...

  • Page 67: Basic Setting Items

    Speakers (channels) number and the size Basic setting items You can find how each of the speaker size is defined according to You can adjust the following items. See pages in parentheses for the number of connected speakers (speaker channel “ch” number) details.

  • Page 68: Operating Procedure

    Operating procedure Setting the speakers To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker after all connections are completed. • If you have used Quick Speaker Setup on page 17, this setting is not required.

  • Page 69: Activating The Ex/Es/Pliix Setting-Ex/Es/Pliix

    Setting the speaker distance Activating the EX/ES/PLIIx setting— The distance from your listening point to the speakers is one of EX/ES/PLIIx the important elements to obtain the best possible sound effect from the Surround/DSP modes. By referring to the speaker distance, the receiver automatically Depending on this setting, available Surround modes for digital sets the delay time of the sound through each speaker so that multi-channel software vary—EX/ES/PLIIx (7.1-channel)

  • Page 70: Selecting The Main Or Sub Channel-Dual Mono

    Setting the crossover frequency—CROSSOVER Selecting the main or sub channel Small speakers cannot reproduce the bass sounds efficiently. If —DUAL MONO you use a small speaker in any position, this receiver automatically reallocates the bass sound elements assigned to the small speaker to the large speakers. You can select the playback sound (channel) you want while To use this function properly, set this crossover frequency level playing digital software recorded (or broadcasted) in Dual Mono...

  • Page 71: Setting The Digital Input (Digital In) Terminals

    For the VCR (VCR VIDEO IN): Setting the digital input (DIGITAL IN) < > terminals—DIGITAL IN 1/2/3 Select when connecting the VCR to the composite video or S-video input jacks. < > When you use the digital input terminals, register what CMPNT Select when connecting the VCR to the components are connected to which terminals—DIGITAL IN 1/2/3...

  • Page 72: Sound Adjustments

    Operating procedure Sound adjustments On the front panel: Before you start, remember... You can make sound adjustment to your preference after There is a time limit in doing the following steps. If the setting is completing basic setting. canceled before you finish, start from step 1 again. Basic adjustment items Ex.: When adjusting subwoofer output level.

  • Page 73: Adjusting The Speaker Output Levels

    Adjusting the speaker output levels Adjusting the equalization patterns— D EQ 63Hz/250Hz/1kHz/4kHz/16kHz • SUBWFR LVL (subwoofer output level), • FRONT L LVL (left front speaker output level), You can adjust equalization patterns in five frequency bands • FRONT R LVL (right front speaker output level), (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the •...

  • Page 74: Adjusting The Bass Sounds

    Adjusting the bass sounds From the remote control: Reinforcing the bass—BASS BOOST Press EFFECT to select the level you want to adjust. You can boost the bass level—Bass Boost. • Once you have made an adjustment, it is memorized for each source.
  • Page 75 Adjusting the center channel localization for Pro Adjusting the center tone—CENTER TONE Logic IIx Music and Pro Logic II Music—CENTER This setting is available when one of the Surround/DSP modes is WIDTH in use. To activate Surround/DSP mode, see page 33. •...

  • Page 76: Tuner Operations

    Tuning in to stations manually Tuner operations From the remote control ONLY: Press FM or AM to select the band. The last received station of the selected band is tuned in. ANALOG TUNED STEREO AUTO MUTING S.WFR Press repeatedly or hold TUNING 9 or Tuner operations are mainly done from the remote control.

  • Page 77: Selecting The Fm Reception Mode

    Press the numeric buttons (1 – 10, +10) to On the front panel: select a channel number while the channel 2 1,3 number position is flashing. • For channel number 5, press 5. • For channel number 15, press +10, then 5. •...

  • Page 78: Creating Realistic Sound Fields

    Introducing the Surround modes Creating realistic ■ Dolby Digital* sound fields Dolby Digital is a digital signal compression method, developed by Dolby Laboratories, and enables multi-channel encoding and decoding. • When Dolby Digital signal is detected through the digital input, indicator lights up on the display.
  • Page 79 < > “ ” in the speaker setting (see page 19), JVC’s original 3D-PHONIC processing (which has been developed to create DTS Digital Surround the surround effect through the front speakers only) is used. The DTS Digital Surround (DTS) is another discrete 5.1 channel...

  • Page 80: Introducing The Dsp Modes

    ” in the speaker The sound heard in a concert hall, club, etc. consists of direct setting (see page 19), JVC’s original 3D-PHONIC processing sound and indirect sound—early reflections and reflections from (which has been developed to create the surround effect behind.

  • Page 81: Using The Surround/Dsp Modes

    Using the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below. • The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the surround channels.

  • Page 82: Activating The Surround/Dsp Modes

    On the front panel: Activating the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details, see page 32. Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments. Before you start, remember... •...

  • Page 83: Av Compu Link Remote Control System

    This receiver is equipped with the AV COMPU LINK-III, which has through the S-video terminals, connect this receiver to the added a function to operate JVC’s video components through the TV’s video input 1 terminal using S-video cables. component video jacks. To use this remote control system, you...
  • Page 84 Connecting procedure One-touch DVD play Simply by starting playback on the DVD player, you can enjoy the DVD playback without setting other switches manually. If you have already plugged your VCR, DVD • When the DVD player is connected through the analog input player, TV, and this receiver into the AC jacks on this receiver (and analog input is selected), the outlets, unplug their AC power cords first.

  • Page 85: Operating Other Jvc Products

    “A” and “B.” This remote control can operate a VCR whose remote control code is set to “A.” – Some JVC DVD recorders can accept four types of the control signals. This remote control can operate a DVD recorder whose remote control code is set to the initial code.
  • Page 86 Enter recording pause. To start recording, press 3. recorder Some JVC DVD recorders can accept four types of the control signals. You can assign one of four codes to the remote Only for DVD player operations: control supplied with this receiver for operating your DVD recorder.

  • Page 87: Operating Other Manufacturers' Products

    Manufacturers’ codes for TV Operating other Manufacturer Codes manufacturers’ Akai Bell+Howell products Centurion Coronad Daewoo 06, 07, 08 Emerson 09, 10, 11, 12, 13 Fisher GE•Pana 15, 16 By changing the transmittable signals, you can use the GE•RCA supplied remote control to operate other manufacturers’ Gold Star 18, 19 products.
  • Page 88 ❏ Changing the transmittable signals for operating Manufacturers’ codes for VCR a VCR Manufacturer Codes Press and hold VCR 01, 02, 03, 04 Press VCR. Aiwa Enter the manufacturer’s code using buttons Akai 06, 07, 08 1 – 9, and 0. Bell+Howell See “Manufacturers’...
  • Page 89 ❏ Changing the transmittable signals for operating ❏ Changing the transmittable signals for operating a DVD player a CATV converter or DBS tuner Set the mode selector to “DVD.” Press and hold DBS/CATV Press and hold DVR/DVD Press DBS. Press DVR/DVD. Enter the manufacturer’s code using buttons 1 –...

  • Page 90: Troubleshooting

    Troubleshooting Use this chart to help you solve daily operational problems. If there are any problems you cannot solve, contact your JVC’s service center. PROBLEM POSSIBLE CAUSE SOLUTION The power does not come on. The power cord is not plugged in.

  • Page 91: Specifications

    Video Specifications Video Input Sensitivity/Impedance: Composite video: DVR/DVD, VCR, DBS: 1 V(p-p)/75 Ω S-video: DVR/DVD, VCR, DBS: Y (luminance): 1 V(p-p)/75 Ω C (chrominance, burst): 0.286 V(p-p)/75 Ω Component: DVR/DVD, VCR (DBS): Y (luminance): 1 V(p-p)/75 Ω 0.7 V(p-p)/75 Ω Video Output Level/Impedance: Designs and specifications are subject to change without Composite video: DVR, VCR, MONITOR OUT:...
  • Page 92 EN, FR © 2005 Victor Company of Japan, Limited 0305RYMMDWJEIN...
  • Page 93 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...

This manual is also suitable for:

Rx-d302bRx-d302bjRx-d301s

Table of Contents