Starting The Engine; Shutting Off The Engine - Toro TimeCutter MyRIDE 77602 Operator's Manual

Starting the Engine

Start the engine as shown.
Note:
Do not engage the starter for more than 5 seconds at a time; otherwise, you can
damage the starter motor. If the engine fails to start, wait 1 minute before operating
the engine starter again.

Shutting Off the Engine

1. Disengage the blades by moving the blade-
control switch to the O
2. Move the motion-control levers outward to the
P position.
ARK
3. Move the throttle control between the half and
full throttle position.
4. Turn the key to the O
the key.
3464-628A
A warm or hot engine may not require choking.
position.
FF
position and remove
FF
IMPORTANT
G451068
G440082
Page 4–11 Operation: During Operation