Removing The Mower Deck; Installing The Mower Deck - Toro TimeCutter MyRIDE 77602 Operator's Manual

Removing the Mower Deck

1. Park the machine on a level surface, disengage the blade-control switch, and move the
motion-control levers outward to the P
2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving
the operating position.
3. Lower the height-of-cut lever to the lowest position.
4. Remove the hairpin cotter and washer from the
front support rod
the deck bracket
Note:
5. Lift the deck and chains off the brackets at all 4
corners of the deck.
6. Slide the mower deck rearward to remove the
mower belt from the engine pulley.
7. Slide the mower deck out from underneath the
machine.

Installing the Mower Deck

1. Park the machine on a level surface, disengage the blade-control switch, and move the
motion-control levers outward to the P
2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving
the operating position.
3. Slide the mower deck under the machine.
4. Lower the height-of-cut lever to the lowest position.
5. Lift the mower deck chains onto the deck-lift brackets.
6. Attach the front support rod
bracket
7. Install the mower belt onto the engine pulley.
Maintenance: Mower-Deck Maintenance
, and remove the rod from
.
Retain all parts for future installation.
with the hairpin cotter and washer.
position.
ARK
G451546
position.
ARK
to the deck
G451546
Page 5–29 3464-628 A