ELNA 6003 Instruction Book page 22

Rolled Hem
An easy, professional way to sew hems using the straight
stitch. Recommended for fine, sheer fabrics used in bridal!
wear.
@® 1: Straight stitch
@® D: Hemmer foot
@ Make a double 3 mm (1/8") fold approximately 8 cm
(8") in length.
@ Lower the needle into the fabric at the point where
sewing is to begin; lower the hemmer foot D. Sew 3
or 4 stitches while holding the needle and bobbin
threads.
© Lower the needle into the fabric and raise the hemmer
foot. Insert the folded portion of the fabric into the cur!
of the hemmer foot.
@ Lower the hemmer foot, then sew by lifting up the edge
of the fabric to keep it feeding smoothly.
© Trim about 6.5 mm (1/4") from corners to reduce bulk.
20