ELNA 6003 Instruction Book page 40

ARANAAAA
"3 TOUANATITTE
IANA UL
VY AY
ee
©
ANAARA
IAI
IH
LAMALAAAL
LAAAMAAA tote HAA AA) AMAL
Darning
Automatic darning saves a lot of time. It is used for
repairing very worn areas (not holes) in fabric.
® 41: Automatic darning
@ R: Automatic buttonhole foot
@ Extend the button holder to the far back. Place both
threads to the left under the foot. Insert the garment
under the foot and lower the needle at the starting
point. Lower the foot. Sew.
¢ The size of one darn cycle is variable, However, the
maximum stitch length is 2 cm (3/4") and the
maximum stitch width is 7 mm (1/4").
Button holder
Starting point
© Stitch length
© Stitch width
@ For darning a length less than 2 cm (3/4"), first stop the
machine after sewing the desired length ana then press
the reverse button. The required length has now been
determined. Now restart the machine and continue
sewing until the machine stops automatically.
@ Darning stitch length
Reverse key
To memorize darning stitches
First stop the machine after sewing the desired length and
then press the Enter key. The required length has now been
determined and memorized. Now restart the machine and
continue sewing until the machine stops automatically.
By pressing the Mirror Image key, the starting point can be
changed to the right.
® Mirror Image key
© To Adjust the Evenness of Darning Stitches
If one side of the darning stitch is higher or lower than the
other, make them even by pressing the Stitch Length key
as illustrated.
38