How To Sew Ona Button - ELNA 6003 Instruction Book

How to Sew on a Button
@ 2: Zigzag stitch
@ F: Satin stitch foot
@ Drop feed dog (see page 6)
= @ °
S ©)
—z)
+=
e Set the stitch width according to the position of the holes
in the button.
@ Match the holes in the button to the horizontal slot on
the presser foot.
Lower the foot to hold the button in place.
Turn the flywheel by hand until the needle is just above
the button.
Press the key to position the needle above the
left hole of the button.
@ Turn the flywheel to position the needle to enter the
right hole of the button. Readjust the stitch width if
necessary.
Stitch several times.
After you finish sewing, cut the thread but leave 10 to
15 cm (4" to 6") of thread at the button
Pull the thread to the reverse side of the fabric and tie
the threads.
Raise the feed dog after sewing on buttons. (See
page 6.)
34