ELNA 1600 Instruction Manual page 2

INSTRUCTION MANUAL
This sewing machine is intended for household use.
Read all instructions before using.
DANG E R - To reduce the risk of
electric shock:
1. Never leave unattended when plugged in.
Always unplug this machine from the electric
outlet immediately after using and before
cleaning.
2. Always unplug before relamping. Replace bulb
with same type rated 15 Watts.
WA R N | NG - To reduce the risk of
burns, fire, electric shock, or injury to
persons:
1. Do not allow to be used as a toy. Close
attention is necessary when this sewing
machine is used by or near children.
2. Use this sewing machine only for its intended
use as described in this manual. Use only
attachments recommended by the manufac-
turer as contained in this manual.
3. Never operate this sewing machine if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or
dropped into water. Return the sewing machine
to the nearest authorized dealer or service
center for examination, repair, electrical or
mechanical! adjustment.
4. Never operate the sewing machine with any air
openings blocked. Keep ventilation openings of
the sewing machine and foot controller free
from the accumulation of lint, dust, and loose
cloth.
. Never drop or insert any object into any
opening.
. Do not use outdoors.
. Do not operate where aerosol (spray) products
are being used or where oxygen is being
administered.
. To disconnect, turn the mains switch to the off
position, then remove plug from outlet.
. Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
. Keep fingers away from all moving parts.
Special care is required around the sewing
machine needle.
. Always use the proper needle plate. The wrong
plate can cause the needle to break.
. Do not use bent needles.
. Do not pull or push fabric while stitching. It may
deflect the needle causing it to break.
. Switch the sewing machine off when making
any adjustments in the needie area, such as
threading needle, changing needle, threading
bobbin, or changing presser foot.
. Always unplug sewing machine from the
electrical outlet when removing covers, lubricat-
ing, or when making any other user servicing
adjustments mentioned in the instruction
manual.
SAVE THESE INSTRUCTIONS