Changing The Priority Of Overlapped Settings - Sony RDR-HX730 Operating Instructions Manual

Changing the priority of
overlapped settings
If the timer settings overlap, the program that
was set last has priority and will be recorded.
A timer recording of lower priority may be
canceled, start from the middle or stop
midway through the program.
You can change the priority of a program if
necessary.
When the timer settings overlap
The program set last has priority.
Example: You set the timer in order of A, B,
and C (setting C has first priority)
Actual recording
If you give setting B priority over setting C,
all of program B will be recorded and
program C is recorded only after program B
has ended.
If the end time of one recording and the
start time of another are the same
If program B has priority, the end of program
A will be cut off.
If program A has priority, recording of
program B may be delayed.
1
Press TIMER LIST.
The Timer List appears.
2
Select an overlapped timer setting,
and press ENTER.
overlapped by another timer setting.
3
Select "Check Overlap," and press
ENTER.
will be cut off
4
Select "Change," and press ENTER.
5
Press M/m to change the timer
setting's priority, and press ENTER.
The setting moves to its new location in
the list. A timer setting higher up in the
list has higher priority.
To return to the Timer List, select
"Cancel."
z Hint
You can change the priority of a timer setting while
recording.
indicates that the timer setting is
49