Star Trac 1000 Owner's Manual page 35

Specifications
Chassis
3" X 1" rectangular spring steel uni-frame.
Mechanical
MOTOR: 1.5 HP continuous duty rated 90 volt DC
motor.
FLYWHEEL: Eight inch (20.32 cm), 9 lb (4.05 kg),
dynamically balanced flywheel.
ROLLERS: 3 inch crowned headroller and tailroller
with dual permanently sealed bearings - virtually
maintenance free.
DRIVE: 1" wide grooved drive pulley
Elevation
Motorized user selectible, single-screw lift mechan¬
ism. Range: 0 to 15 % grade in 1 % increments.
Speed Range
Selectable speed: .5 to 10 mph in . 1 mph increments
(.08 to 16 kmph)
Readouts
Multi-function motivational digital display:
- Programmable
- Eight Preset Programs
- Elapsed Time
- Distance (in miles/kilometers)
- Speed (in mph/kmph)
- Total Calories
- Laps (1 lap = 1/4 mile)
- Pace (minutes per mile/kilometer)
- Motivational Track Display
- Heart-Rate Timer
- Elevation (percent)
Display Panel
1. BASIC Operation. Press "START" and adjust speed
by pressing the plus (+) or minus (-) keys. If you
know your desired speed, enter speed using numbers
keys. To change elevation, press the up and down
arrow keys.
2. ADVANCED Operation. Select from 10 programs,
*0-9" using numbers keys. Respond to duration,
personal weight and speed commands using number
keys. Press "START" after each entry.
Electrical
U.S. - 110 volt, single phase requires a 20 A dedicated
eletrical circuit. Automatic circuit breaker in power
switch. Standard with a 10-foot power cord and a 5-15
NEMA plug.
Euro - 220 volt, single phase requires a 20 A dedicat¬
ed eletrical circuit. Automatic circuit breaker in power
switch. Standard with a 10-foot power cord and a 6-20
NEMA plug.
Running Board
1 inch (2.54 cm) high density composite fiberboard
with phenolic laminate. Reversible running deck treat¬
ed with low friction wax.
Dimensions
Length:
74 1/2" (189.23 cm)
Width:
28" (71.12 cm)
with handrails 32"
(81.28 cm)
Height: 55" (139.7 cm)
of nmning surface
7" (17.78 cm)
Walking Area
18"x48"
(45.72 cm x 121.92 cm)
Weight
350 lbs. (157.5 kg)
23