Kenwood TM-241A Instruction Manual page 45

5-10-4 Paging Reception (Stand by)
1. Tune to the predetermined frequency.
2. Press the DR/DT key to light the P indicator.
Stand by with individual code (Example: Stand by for
station 3.)
3. When called with your station ID code, the memory
number automatically change to 0. The ID code of
the member 3 is displayed.
local station code [Flashing
Zero is displayed to indicate that
your station is being called.
4. The squelch is opened.
5. The individual code of the calling station is stored in
memory 0.
Press the PTT switch to respond to the calling station.
145.660MHz
444*111
PYYY pg
gh
| SeamesecepeeeAe |
When the transmission ends, the frequency will be dis-
played again.
After the local station has been contacted, cancel
paging mode. Communication can be performed more
efficiently.
If the local station code can not be decorded, "Err''
appears on the display.
Err pg
saAr —}—~s——s—7—s—over—
45