Kenwood TM-241A Instruction Manual page 43

For example, the following groups communicate
with each other.
Predetermined frequency 145.660MHz
Your individual code 111
Station 1's individual code 222
Station 2's individual code 333
Station 3's individual code 444
Group code 789
Your memory
whl
Station 1 memory
PA 222
PO
P2 789
Station 3 memory
Station 2 memory PA 444
PA 333 PO
PO Pi 789
P3 789 P2 111
5-10-3 Paging Transmission(Calling)
Your individual ID code is preset in memory A. (Your
individual ID code is always stored in memory A.)
1. Tune to the predetermined frequency.
2. Press the DR/DT key to light the P indicator.
indicates
the
paging
3. Press the F key, then press the DR/DT key while the F
indicator is flashing.
4. Select the memory number in which the local station
code is stored using the tuning control.
Turn the paging function of the other
transceiver on.
43