Transporting On A Trailer; Slinging And Jacking The Machine - Jacobsen JMP653F Manual

6 OPERATION
6.11

TRANSPORTING ON A TRAILER ________________________________________

The machine is fitted with tie-down loops front and rear. Always tie down the machine securely to the trailer.
Always follow any recommendations for maximum trailer weights given in your towing vehicles handbook.
Use the chart in the specification section 12.2 to calculate the total weight of your machine
Do Not exceed the maximum gross weight shown on the trailer plate.
Always read the trailer manufactures and towing vehicle manufactures handbooks before towing.
6.12

SLINGING AND JACKING THE MACHINE ________________________________

Slinging
When slinging the machine a set of four damage free wheel clamps must be used,
similar to the one shown, in conjunction with a certified lifting frame.
Jacking points
There are four jack points indicated on the machine, two on the rear axle and two on
the front axle. This decal indicates the correct lift point.
en-64
IMPORTANT
configuration.