Pin; Adapticut - Jacobsen JMP653F Manual

• Put foot back onto the Forward/Reverse pedal and push the pedal forwards. Note in this scenario the machine
will continue to drive forwards.
• Press and release the Cruise Control switch. Note in this scenario the machine will come to a stop.
Cruise will also disengage if the Forward/Reverse pedal is moved backwards to brake.
Cruise can be disabled via the display as follows:
1. Press Button 4 once to enter the Main Menu
2. Use Button 3 to scroll to Settings followed by Button 4 to enter the
Settings Menu
3. Use Button 3 to scroll to PIN followed by Button 4 to enter the Enter
PIN page
4. Enter the Owner PIN (default 1001) to enter the PIN Menu page
5. Use Button 3 to scroll to Cruise Control followed by Button 4 to enter
the Cruise Control settings screen
6. Use Button 2 & 3 to select either Enabled or Disabled as necessary,
followed by Button 4 to set
7. Button 1 is then used to exit to the Main Menu or Home Screen

5.5.4 PIN _________________________________________________________________

Enter Pin
1 0 0 1
_ _ _ _
This screen gives access to the following parameters and machine functions that can be altered:
• Cruise Control
• Cross Cut
• Vehicle Speed
• Fan Drive
• Change PIN
• Inclinometer
• Set Default Parameters
• Drive Modes
The default owner's Pin is 1001, however Jacobsen recommend this is changed
5.5.5 ADAPTICUT™ ________________________________________________________
TM

AdaptiCut

is a load sensing system that maintains optimum cutting performance by adjusting ground speed
depending on the machine cutting system loading. It will automatically activate when the vehicle transmission is
set to Automatic (A), the speed is set to Mow (Cutter Switch is on), Cruise is active, and the cutting system
detects increased load. When active the AdaptiCut
Unit Position lamps on the armrest pod will turn red.
DISABLING CRUISE
Enter Pin Enter Pin
TM
icon will be displayed on the screen and the green Cutting
CONTROLS 5
PIN Menu
Cruise Control
Cross Cut
Vehicle Speed
Fan Drive
Change PIN
en-35