Table of Contents
Advertisement
5.
Loosen the locknut.
6.
To increase the throttle lever free play,
turn the adjusting bolt in direction (a). To
decrease the throttle lever free play, turn
the adjusting bolt in direction (b).
1
2
1. Locknut
2. Throttle lever free play adjusting bolt
3. Throttle lever free play
Throttle lever free play:
2.0–3.0 mm (0.08–0.12 in)
7.
Tighten the locknut.
8.
Install the headlight unit, making sure to
fit the slots on its bottom onto the projec-
tions on its stay.
Periodic maintenance and adjustment
(a)
(b)
3
1
2
1. Slot
2. Projection
9.
Fit the weatherstrip on the headlight unit
into the recess in the top of the air filter
case cover.
1. Weatherstrip
10. Install the headlight unit bolts, and then
tighten them to the specified torque.
Tightening torque:
Headlight unit bolt:
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
11. Install the top cover, the left and right side
covers, and the shroud.
RST90
ECS00410
NOTICE
Be sure to adjust the engine idling speed
first.
1.
Place the snowmobile on a level surface
and apply the parking brake.
1
69
Advertisement
Table of Contents
