Table of Contents
Advertisement
1
2
5
1. Special wrench corner
2. Control rod adjuster
3. Scale range
4. Special wrench
5. Control rod length
TIP
Use the special wrench in the owner's tool kit
to make this adjustment.
2.
Loosen the locknut.
3.
To increase weight transfer, turn the ad-
juster in direction (a), and to decrease
weight transfer, turn it in direction (b).
WARNING! Never adjust the control
rod beyond the range of the scale on
the special wrench, otherwise the con-
trol rod could be damaged, which
could lead to an accident or injury.
[EWS00181]
1. Locknut
2. Control rod adjuster
4.
Tighten the locknut while holding the ad-
juster in place.
3
4
Min
Max
Control functions
TIP
Make sure that the special wrench is securely
fitted on the locknut.
1. Special wrench
Locknut tightening torque:
35 Nm (3.5 m·kgf, 25 ft·lbf)
RST90 / RST90PGT
EWS00770
WARNING
The left and right adjusting nuts must be
set to the same position. Uneven settings
can cause poor handling and loss of sta-
bility.
1.
Loosen the locknut while holding the ad-
justing nut.
1
43
Advertisement
Table of Contents
