Table of Contents
Advertisement
Running Power
Garmin running power is calculated using measured running dynamics information, user mass, environmental
data, and other sensor data. The power measurement estimates the amount of power a runner applies to the
road surface, and it is displayed in watts. Using running power as a gauge of effort may suit some runners
better than using either pace or heart rate. Running power can be more responsive than heart rate for indicating
the level of effort, and it can account for the uphills, downhills, and wind, which a pace measurement does not
do. For more information, go to garmin.com/performance-data/running.
Running power can be measured using a compatible running dynamics accessory or the watch sensors. You
can customize the running power data fields to view your power output and make adjustments to your training
(Data Fields,
page 133). You can set up power alerts to be notified when you reach a specified power zone
(Activity Alerts,
page 40).
Running power zones are similar to cycling power zones. The values for the zones are default values based on
gender, weight, and average ability, and may not match your personal abilities. You can manually adjust your
zones on the watch or using your Garmin Connect account
Running Power Settings
Hold MENU, select Activities & Apps, select a running activity, select the activity settings, and select Running
Power.
Status: Enables or disables recording Garmin running power data. You can use this setting if you prefer to use
third-party running power data.
Source: Allows you to select which device to use to record running power data. The Smart Mode option
automatically detects and uses the running dynamics accessory, when available. The watch uses wrist-based
running power data when an accessory is not connected.
Account for Wind: Enables or disables using wind data when calculating your running power. Wind data is a
combination of the speed, heading, and barometer data from your watch and the available wind data from
your phone.
Using the Varia Camera Controls
Some jurisdictions may prohibit or regulate the recording of video, audio, or photographs, or may require that
all parties have knowledge of the recording and provide consent. It is your responsibility to know and follow all
laws, regulations, and any other restrictions in jurisdictions where you plan to use this device.
Before you can use the Varia camera controls, you must pair the accessory with your watch
Wireless Sensors,
page 90).
1 Add the RCT Camera glance to your watch
2 From the RCT Camera glance, select an option:
• Select
to view the camera settings.
• Select
to take a photo.
• Select
to save a clip.
inReach Remote
The inReach remote function allows you to control your inReach satellite communicator using your quatix
watch. Go to
buy.garmin.com
92
NOTICE
(Glances,
for more information about compatible devices.
(Setting Your Power Zones,
page 55).
page 109).
(Pairing Your
Sensors and Accessories
Advertisement
Table of Contents
