Maintenance
3. When aiming the low beam, vertical aiming should be adjusted after adjusting the
horizontal aiming.
4. If head lamp levelling device is equipped, adjust the head lamp levelling device
switch with 0 positions.
Front fog lamp
僅 A: Vehicle axis
僅 B: Vertical line of the left fog lamp bulb centre
僅 C: Vertical line of the right fog lamp bulb centre
僅 D: Horizontal line of fog lamp bulb centre
僅 E: Ground
僅 F: Cut-Off line
僅 G: Upper limit
Operation
1. Turn the front fog lamp on without the driver aboard.
2. The cut-off line should be projected in the allowable range (shaded region).
9
80
Based on 10m screen
ONQ5041296L
Light bulbs