Kia Sportage 2023 Manual page 185

Hide thumbs Also See for Sportage 2023:
Table of Contents

Advertisement

Infotainment system
Adjusting the settings
Turn the [TUNE] knob to adjust the
value, and then press the knob to save
changes.
Turn the [TUNE] knob to the right to
increase the value and turn the [TUNE]
knob to the left to decrease the value.
Radio
Turning on the radio
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window dis-
plays, turn the [TUNE] knob to select
the desired radio mode and then
press the knob.
FM/AM Mode
1. Current radio mode
2. Radio station information
3. Preset list
Press the [MENU/CLOCK] button on
the control panel to access the following
menu options:
僅 Autostore: Save radio stations to the
preset list.
僅 Scan: The system searches for radio
stations with strong radio signals and
Audio (Without Touch Screen)
plays each radio station for about five
seconds.
僅 Sound settings: You can change the
settings related to sounds, such as
location where sound will be concen-
trated and the output level for each
range.
- Position: Select a location where
sound will be concentrated in the
vehicle. Select Fader or Balance,
turn the [TUNE] knob to select the
desired position, and then press the
knob. To set sound to be centred in
the vehicle, select Centre (Center).
- Equaliser (Tone): Adjust the output
level for each sound tone mode.
- Sound experience: (if equipped)
select the location where sound is
focused in the vehicle between the
driver's seat and all other seats.
- Speed dependent vol.: Set the vol-
ume to be adjusted automatically
according to your driving speed.
NOTICE
僅 Depending on vehicle models or spec-
ifications, available options may vary.
僅 Depending on the system or amplifier
specifications applied to your vehicle,
available options may vary.
僅 Mode popup: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.
僅 Date/Time: You can change the date
and time that are shown on the sys-
tem display.
- Set date: Set date to display on the
system display.
- Set time: Set time to display on the
system display.
5
5
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents