Using The Quick-Release Tire Hubs - Toro 68038 Operator's Manual

Figure 10
1. Rear fork pockets
Figure 11
1. Side fork pockets
Figure 12
1. Platform release ring
Using the Quick-Release
Tire Hubs
The quick-release tire system allows quick removal of
the outer machine tires. The quick-release system
allows the machine to be converted from a 117 cm (46
inch) to a 91 cm (36 inch) wide machine without any
special tools for hub removal.
1. Position the inner wheel of the machine over a
2x4 and engage the parking brake.
2. Remove the large tee bolt in the center of the
g019610
wheel with a crow bar
g019611
1. Tee bolt
3. Remove the outside wheel with quick-change
hub attached.
4. Repeat the above steps on opposite side of the
machine.
Important:
The maximum payload is reduced
to 850 kg (1875 lb) when operating the machine
without the dual wheels.
g019606
18
(Figure 13).
Figure 13
g019624