Toro 68038 Operator's Manual page 9

130-2844
1. Raise the pedal to lower
the hopper.
125-4963
1. Warning—do not touch hot surfaces.
1. Read the Operator's Manual for information on starting the
engine—1) Engage the parking brake; 2) Set the drive to
neutral; 3) Open the choke; 4) Turn the engine switch on; 5)
Engage the fuel switch; 6) Pull the recoil starter and set the
throttle to fast; 7) Close the choke.
decal130-2844
2. Lower the pedal to raise
the hopper.
decal125-4963
1. Press down on the pedal
to apply the service brake
125–4958
2. Read the Operator's Manual for information on shutting off
the engine—1) Set the throttle to slow; 2) Engage the parking
brake; 3) Set the drive to neutral; 4) Turn the engine switch to
stop; 5) Disengage the fuel switch.
9
125–8190
2. Release the pedal to
release the service brake
133-8062
decal125-8190
decal133-8062
decal125-4958