Pre-Maintenance Procedures; Removing The Cowl - Toro 68038 Operator's Manual

Pre-Maintenance
Procedures

Removing the Cowl

Note:
Dump the hopper before you remove the cowl
by using either the hydraulics or by removing the pin
in the hydraulic cylinder and the hopper base.
1. Before removing the cowl
the engine and allow the engine to cool.
Figure 14
1. Cowl
2. Unhook the cowl latches
the cowl.
(Figure 14), shut off
g019788
(Figure 15) and remove
1. Cowl latch
3. Install the cowl and secure the latches upon
completion of the task.
20
Figure 15
g019604