Transporting the Machine
When transporting the machine on a trailer, always
use the following procedure:
Important:
Do not operate or drive the machine
on roadways.
1.
Shut off the engine and engage the parking
brake.
2.
When transporting the machine, observe
overall height for proper clearance of obstacles
overhead.
3.
Ensure that the hopper is lowered and latched
down.
4.
Secure the machine with the proper devices at
the tie-down loop.
1. Tie-down loop
Figure 8
Lifting the Machine
Hoist the machine using 3 lift points under the hopper.
Tilt the hopper forward to locate the 3 lift loops and
attach a chain or straps at each of the loops as shown
in
Figure
9.
Note:
Take up the slack in the chain or straps to
properly balance the unit.
1. Lift points (3)
g019603
Lift the machine with a fork lift from the side or from
the front
(Figure 10
the platform release ring
standing platform to allow access to the fork pockets.
17
Figure 9
and
Figure
11). Pull out on
(Figure
12) and raise the
g019612