BMW 7 Series Owner's Manual page 274

CONTROLS
Rear automatic climate control:
The function is automatically activated in the
rear when the SYNC program is turned on.
Functional requirement
The function is available at an outside temper-
ature above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Turning maximum cooling on/off
1. "CLIMATE MENU"
2. "MAX A/C"
3. Select the desired setting.
Air flows out of the air vents to the upper body
area. Open the vents.
Air recirculation mode
Principle
You may react to unpleasant odors or pollu-
tants in the immediate environment by tempo-
rarily suspending the supply of outside air. The
system then recirculates the interior air.
General information
If there is window condensation, turn off the air
recirculation.
When the air recirculation is turned off, outside
air is directed into the interior.
In the automatic recirculated-air control, out-
side air is drawn in or the interior air is circu-
lated, depending on the outside air quality.
The interior filter cleans the incoming fresh
air or the circulated interior air in recirculation
mode.
Turning air recirculation on/off
1. "CLIMATE MENU"
2. The current operating mode is displayed in
the toolbar. Select the desired setting in the
toolbar:
274
Climate control
Online Edition for Part no. 01405A5EA63 - VI/22
▷ "Air recirculation"
▷ "Fresh air"
▷ "Auto air recirculation"
Depending on vehicle equipment, air recircula-
tion will turn off automatically based on ambi-
ent conditions in order to prevent window con-
densation.
Air flow
General information
The air flow generated by the blower can be
adjusted as needed.
Adjusting the air flow
1. "CLIMATE MENU"
2. Air flow.
3. Select the desired setting.
The air flow may be reduced to preserve the
vehicle battery.
Adjusting the air volume of the rear
climate control
Via iDrive
1. "CLIMATE MENU"
2. "Settings"
3. "Rear climate control"
4. "Fan"
5. Select the desired setting.
Via BMW Touch Command
1. Tap on the icon.
2. Tap the climate bar on the touchscreen.
3. Tap on the icon.
4. Select desired setting, for example,
"MEDIUM".
▷ Increase air flow.
▷ Reduce air flow.