BMW 7 Series Owner's Manual page 162

CONTROLS
Some contents for the central display range
can also be configured as a view in the Head-
up display.
Additional information:
Head-Up Display, refer to page 149.
Configuring the central display
range
The content of the central display range on the
instrument cluster can be configured individu-
ally, for instance the trip data display.
1. Press the button on the steering
wheel.
A menu bar is displayed in the instrument
cluster.
2. "CONTENT"
Select the menu by tilting the thumbwheel
on the steering wheel where applicable.
3. Select the desired setting using the thumb-
wheel on the steering wheel.
Trip data
Principle
The trip data display provides various informa-
tion about the trip, e.g., average consumption
or trip distance.
General information
The trip data can be displayed on the Control
Display and in the instrument cluster.
Depending on the setting in the Live Vehicle
menu, the trip data is shown dynamically or
permanently on the control display.
The values can be displayed and reset de-
pending on different intervals.
162
Displays
Online Edition for Part no. 01405A5EA63 - VI/22
Display on the control display
General information
The following trip data is shown on the control
display:
▷ Configured interval for displaying trip data.
▷ Average fuel consumption depending
on the configured interval.
▷ Travel time depending on the config-
ured interval.
▷ Distance traveled depending on the
configured interval.
▷ Distance traveled in Coasting mode.
Displaying trip data continuously
1. "MENU"
2. "Vehicle apps"
3. "Live Vehicle"
4. "Content"
5. "Trip data"
Display in the instrument cluster
Information on consumption and distance cov-
ered can be displayed in the instrument clus-
ter.
▷ Current consumption, arrow 1.
▷ Average consumption, arrow 2.
▷ Distance traveled depending on the config-
ured interval, arrow 3.