BMW 7 Series Owner's Manual page 205

6. "CROSS TRAFFIC WARNING"
7. Select the desired setting.
Turning on the cross traffic warning
automatically
If the system was activated on the control dis-
play, it is automatically turned on as soon as
the Park Distance Control or a camera view is
active and a selector lever position is engaged.
If reverse gear is engaged, the rear system is
switched on.
Depending on the equipment, the front system
is turned on when a gear position is engaged.
Depending on the national-market version, the
system is automatically active when the vehi-
cle is started.
Turning off the cross traffic warning
automatically
The system is automatically turned off in the
following situations:
▷ When the speed exceeds walking speed.
▷ When a certain distance covered is ex-
ceeded.
Warning function
General information
The respective display is called up on the Con-
trol Display. A signal tone may sound and the
light in the exterior mirror may flash.
Online Edition for Part no. 01405A5EA63 - VI/22
Safety
Visual warning
Light in the exterior mirror
The light in the exterior mirror flashes if vehi-
cles are detected by the rear sensors and your
own vehicle is moving in reverse.
Display in the Park Distance Control view
In the Park Distance Control view, the respec-
tive boundary area flashes red if vehicles are
detected by the sensors.
Display in camera image
Depending on the direction of travel, the view
to the front or back is displayed in the camera
image.
CONTROLS
205