BMW 7 Series Owner's Manual page 141

The indicator light indicates that the
parking brake is ready for operation
again.
Automatic Hold
Principle
Automatic Hold assists the driver by automati-
cally setting and releasing the brake, such as
when moving in stop-and-go traffic.
When a gear position is engaged, the vehicle
is automatically held in place when it is station-
ary.
On uphill grades the system prevents the vehi-
cle from rolling back when driving off.
General information
The parking brake is automatically engaged
under the following conditions:
▷ Drive-ready state is switched off.
▷ The driver's door is opened while the vehi-
cle is stationary.
▷ The moving vehicle is brought to a stand-
still using the parking brake.
In selector lever position N, Automatic Hold is
temporarily deactivated.
Safety information
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before leaving the vehicle, secure the vehicle
against rolling away.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
Online Edition for Part no. 01405A5EA63 - VI/22
Driving
▷ Set the parking brake.
▷ On uphill grades or on downhill slopes,
turn the front wheels in the direction of
the curb.
▷ On uphill grades or on downhill slopes,
also secure the vehicle, for instance with
a wheel chock.
Warning
Unattended children or animals in the vehicle
can cause the vehicle to move and endanger
themselves and traffic, for instance due to the
following actions:
▷ Pressing the Start/Stop button.
▷ Releasing the parking brake.
▷ Opening and closing the doors or win-
dows.
▷ Engaging selector lever position N.
▷ Using vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the
vehicle. Take the vehicle key with you when
exiting and lock the vehicle.
Overview
Button in the vehicle
Automatic Hold
CONTROLS
141