BMW 7 Series Owner's Manual page 126

CONTROLS
Mounts for lower anchors
General information
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lbs/30 kg when the child
is restrained by the internal harnesses.
Safety information
Warning
If the lower mountings of the child restraint
system are not correctly engaged, the protec-
tive effect of the child restraint system is lim-
ited. There is a risk of injury or danger to
life. Make sure that the lower mountings are
correctly engaged and that the child restraint
system fits securely against the backrest.
Warning
The mounts for the lower mountings and at-
tachment points of the child restraint system
are intended for attaching child restraint sys-
tems only. If other objects are attached, the
mounts or attachment points can be dam-
aged. There is a risk of injury or risk of dam-
age to property. Only attach child restraint
systems at the corresponding mounts for the
lower mountings or attachment points.
126
Transporting children safely
Online Edition for Part no. 01405A5EA63 - VI/22
Position
Icon Meaning
The corresponding icon shows
the mounts for the lower
LATCH anchors.
Seats equipped with lower
mountings are marked with a
pair (2) of LATCH icons.
For vehicles equipped with a
middle seat:
It is not recommended to use
the inner lower mountings of
standard outer LATCH posi-
tions to fasten a child restraint
system on the middle seat.
Use the vehicle seat belt in-
stead for the middle seat.
Before attaching child restraint
systems
Pull the seat belt away from the area of the
child seat mountings.
Installing child restraint systems
1. Mount child restraint system, see manufac-
turer's information.
2. Make sure that the child restraint system
mount is correctly engaged in the lower an-
chor on both sides.
With comfort rear seats: installation
of child restraint systems
To mount the child restraint system in the rear,
set the standard position. The function is oper-
ated via BMW Touch Command.
1. "Seats"
2. "Adjustment"
3. "Reset"
When the desired position is reached, a
message is displayed: