BMW 7 Series Owner's Manual page 226

CONTROLS
Changing over the Cruise Control mode
Turning Cruise Control without distance control
on or off:
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Distance control"
7. "Switch to Cruise Control"
The setting is reset when the vehicle is parked.
Displays in the instrument cluster
General information
Depending on the equipment version, the dis-
plays in the instrument cluster may vary.
Display in the speedometer
▷ Green marking: system is ac-
tive, the marking indicates
the desired speed.
▷ Gray marking: system is in-
terrupted, the marking indi-
cates the stored speed.
▷ No marking: system is switched off.
226
Driver assistance systems
Online Edition for Part no. 01405A5EA63 - VI/22
Indicator/warning lights
Icon Description
Vehicle icon white:
No distance control display, as the
accelerator pedal is being pressed.
Green icon:
A vehicle has been detected ahead of
you.
The vehicle icon goes out if no vehicle
in front is detected.
Vehicle icon flashes green:
Vehicle in front drove off.
Icon flashes gray:
The conditions are not adequate for
the system to work.
The system was deactivated but ap-
plies the brakes until you actively
resume control by pressing on the
brake pedal or accelerator pedal.
Vehicle icon flashes red and a signal
sounds:
Brake and make an evasive maneu-
ver, if necessary.
Displays in the Head-up display
Set speed
Depending on the equipment, some system
information can also be displayed in the Head-
up Display.
Distance information
The icon is displayed when the dis-
tance from the vehicle traveling ahead
is too short.
The distance information is active in the fol-
lowing situations: