Telex Audiocom US-2002 User Instructions page 25

Intercom user station

Hide thumbs Also See for Audiocom US-2002:

Table of Contents

Cables

NOTE: For further

information about

cables, see

Figure 15 on

page 24.

External Audio Input and PA Output. You can connect two audio sources to the Program Inputs

FIGURE 14.

connector: one for each channel. Audio sources can be directly connected with a user-supplied DB9M connector. (Refer

to the program input connector specifications, located on page 11, for connector pin-out.) However, a more convenient

method is to use an XP-USPG Breakout Panel as shown. The XP-USPG lets you use standard, 3-pin XLR audio cables

to connect audio sources. The XP-USPG also interfaces the PA jack of the US2002 to a standard, 3-pin XLR audio

cable. Note: The XP-USPG Breakout Panel can be rack mounted using a BOP-1000 Rack Mount Plate.

Table of Contents