Telex Audiocom US-2002 User Instructions page 22

Installation
Typical Remote Monaural Speaker Station. This example is similar to the one on the previous page, except
FIGURE 11.
a Telex MCP-90-XX microphone and a SPK-2000 speaker are used instead of a headset. Make sure the intercom DIP
switches are set for monaural speaker operation (default setting) as described on page 9. A PA-KP local power supply is
required for the SPK-2000, but is optional for the US2002. When a PA-KP is connected to the US2002, the US2002
automatically disconnects from system power. This makes more system power available for belt packs and other
intercom stations. Also, when the US2002 is powered by a PA-KP, it can be operated over a greater distance as a remote
station.
20
NOTE: For further
information about
cables, see
Figure 15 on
page 24.