Telex Audiocom US-2002 User Instructions page 14

Installation
Shielded patch cable, stereo miniplug to stereo miniplug. Customer local purchase: available at most electronic stores.
8.
Shielded audio cable. Must have male 3-pin XLR connector at one end for connection to the XP-USPG or XP-4PGM
9.
program inputs. Pin-out for program inputs is as follows:
Pin 1: common
Pin 2: + program input
Pin 3: - program input
Shielded audio cable. Must have male 3-pin XLR connector at one end for connection to the XP-USPG PA output. Pin-out
10.
for PA output is as follows:
Pin 1: common
Pin 2: + PA output
Pin 3: - PA output
18" (457 mm) CHANNEL OUTPUT cable, 15-pin Male Dsub to 15-pin Female Dsub. One supplied with each XP-
11.
ES4000. (Optional component. See ES4000A User Manual for connection information.)
12