Table of Contents
Advertisement
Installation
US2002 Headset Station Configuration with 2 Power Supplies. In this configuration, the PS2001L
FIGURE 9.
Combine/Isolate switches are set to the Combine position. With this setting all intercom stations connected to the one
PS2001L are combined on intercom channel 1 and all intercom stations connected to the other PS2001L are combined
on channel 2. Typically, a headset is connected to the front panel of the US2002, and the US2002 dip switches are set to
monaural operation (default setting) so that both intercom channels are heard in the monaural headphones (binaural
headphone operation is not supported). The PA-KP local power supply is optional. When a PA-KP is connected, the
US2002 automatically disconnects from system power. Since the US2002 is not drawing power from the intercom
system, more system power is available for additional belt packs, etc.
18
NOTE: For further
information about
cables, see
Figure 15 on
page 24.
NOTE: A
BOP-1000 may
be used to rack
mount 2 TW-7W
splitters.
Advertisement
Table of Contents
