Setting Vari-Program - Nikon N70 AF Instruction Manual

SETTING VARI-PROGRAM
+
Use Nikkor lenses with CPU such as AF Nikkor or AI-P-
Nikkor lenses and be sure to set lens aperture to the
minimum setting.
Press
Vari-Program (Ps) button and confirm exposure
mode
symbol (P , S, R or tI) starts blinking. While holding Ps button,
rotate command dial until
Ps
appears in the Exposure Mode
Area and Vari-Program set indicator appears under your
desired Vari-Program symbol. Then remove your finger from
Ps button.
62
When Vari-Program is set, camera settings are automatically
reset as
follows:
Metering system
Focus area
Flexible Program
Sync mode
Exposure compensation function
• You can change setting as desired.
fWI
Matrix'
[j]
Wide', or 0 Spot with
flash
Cancel'
Slow Sync for Night Scene
Program and Motion Effect
Program, or normal sync for
others"
Cancel'
"You can set Red-Eye Reduction with built-in flash or SB-281SB-27ISB-26, without
canceling Slow Sync.
If
an accessory Speedlight other than the SB-28/SB-27ISB-26
is attached, setting sync mode to Red-Eye Reduction causes ~ ,
@ ,
and
SLOW
blinking in the LCD panel. In this case, Slow Sync will be performed without Red-Eye
Reduction.